apa102 led pixel strip
apa102 led pixel strip is made of flexible PCB material, and comes with a weatherproof sheathing. You can cut this led pretty easily with wire cutters, there are cut-lines every LED. Solder to the 0.1" copper pads. Of course, you can also connect strips together to make them longer, just one thing you should know is how much current you need! We have one 5V/2A supply that should be able to drive 1 meter, another one 5V/4A that can drive a couple meters, and a 5V/10A supply that can drive up to 10 meters (depending on use) You must use a 5V DC power supply to power these strips, do not use higher than 6V or you must destroy the entire strip
These strips come in 5 meter reels with a 4-pin JST SM connector on each end. These strips are sold by the meter! If you buy 5 meters at a time, you'll get full reels with two connectors. To wire up these strips we suggest picking up some JST SM plug and receptacle cables for the signal wires For the power wires, you will also probably want a 2.1mm DC jack to wire in so you can connect one of our 5V adapters to power it.