controlling APA102(C) LED strip. This LED strip can not be controlled with a normal RGB controller but need a special controller that sends specific data to the ledstrip.
T1000S Controller for 5 Volt Digital APA102 LED strip
1 data output to the LEDs or LED strip.
1 clock output to the LEDs or LED strip.
Multiple controllers working together easy connecting them with each other
Quick and easy movies and/or photos on a LEDscreen
SD card included
Up to 2024 LEDs on the output
Multiple controllers can work together
Guide and support by sfleds.com
T1000S makes it quite easy to make a display with these LEDs or LED strip. To control this display this controller is required. This controller controls the LEDs on using a program that is put onto an SD card by the user. This SD card is included with the controller. The software needed to make the controller program is free and is also supplied with the controller. With this software, you simply specify how many LEDs are used, and how the data line runs through the LEDs. Then with this software it is quite easy to apply texts, photos or movies to the output.
It is also possible to attach a single LED strip. This controller makes it possible to display beautiful light effects. To see this, please contact LEDtuning.nl and come to take a look at the Experience Center.
To control the LEDs there should be a program on the SD card that is included. But these are already loaded with standard programs for a quick start. After the software is installed on a PC, you can start immediately. Specify how many LEDs are used, and where the data is fed. Choose a video effect, load a movie or use the capture tool and then it is possible to make some nice LED effects.
For a detailed how-to tips or advice you can always contact LEDtuning.nl. It is also possible to let LEDtuning.nl create a program. For more information, please call, or mail to email@example.com.
Associated software download:
APA102 RGB Led Strip
APA102 White Led Strip